Products
With innovative development technologies, superior quality, and competitive manufacturing cost, our products have been used for wireless applications including GPRS, WLAN, Bluetooth, Wi-Fi, CATV, GPS, satellite communication, base station, RF modules, high-frequency measurement equipment, as well as consumer products such as antennas, mobile phones, medical devices, home electronics, and RFID, etc.
Auto Connector
Antenna
MINI RF
USS RF
SCS RF
SMA、MCX
BTB Connector
FPC Connector
FPC Board
WTB
High-speed Cables
Precision Metals
Type C
Material: C7521 T0.2 ; Die-cutting side burr with 0.05mm Max, no sharp corners ; No defect such as dent /scratch / oil / spot / nigrities etc. ; Hazardous substances must comply with ECT environmental control standards ; The inner surface is sprayed with insulating paint, high temperature resistance 260°C±5°C ; The paster side will be with full solder, no blank space or concave point in the midddle ; Operating Temperature: -20°C ~ +65°C
See details
Material: C7521 T0.15 ; Die-cutting side burr with 0.05mm Max, no sharp corners ; No defect such as dent /scratch / oil / spot / nigrities etc. ; Hazardous substances must comply with ECT environmental control standards ; The inner surface is sprayed with insulating paint, high temperature resistance 260°C±5°C ; The paster side will be with full solder, no blank space or concave point in the middle ; Operating Temperature: -20°C ~ +65°C
See details
Material: SUS304 T0.25 ; Die-cutting side burr with 0.05mm Max, no sharp corners ; No defect such as dent /scratch / oil / spot / nigrities etc. ; Hazardous substances must comply with ECT environmental control standards ; The inner surface is covered with foam cotton and strong-weak glue ; High temperature resistance should be 260°C±5°C / 3 min ; Salt mist test can meet within 24 hours ; Operating Temperature: -20°C ~ +65°C
See details
Material: AL50(Tin Plate)T0.15 ; Die-cutting side burr with 0.05mm Max, no sharp corners ; No defect such as dent /scratch / oil / spot / nigrities etc. ; Hazardous substances must comply with ECT environmental control standards ; High temperature resistance should be 260°C±5°C / 3min ; Salt mist test can meet within 24 hours ; Operating Temperature: -20°C ~ +65°C
See details
Material: C2680 T1.8 ; Die-cutting side burr with 0.05mm Max, no sharp corners ; No defect such as dent /scratch / oil / spot / nigrities etc. ; Hazardous substances must comply with ECT environmental control standards ; High temperature resistance 260°C±5°C / 3min ; Salt mist test can meet within 24hours ; The paster side will be with full solder, no blank space or concave point in the middle ; Operating Temperature: -20°C ~ +65°C
See details
Material: SUS304 T0.7 ; Die-cutting side burr with 0.05mm Max, no sharp corners ; No defact such as dent /scratch / oil / spot / nigrities etc. ; Hazardous substances must comply with ECT environmental control standards ; high temperature resistance 260°C±5°C / 3min ; Salt mist test can meet within 24 hours ; Operating Temperature: -20°C ~ +65°C
See details
Material: C7521 T0.30 ; Die-cutting side burr with 0.05mm Max, no sharp corners ; No defect such as dent /scratch / oil / spot / nigrities etc. ; Hazardous substances must comply with ECT environmental control standards ; High temperature resistance 260°C±5°C / 3min ; The paster side will be with full solder, no blank space or concave point in the middle ; Operating Temperature: -20°C ~ +65°C
See details
Material: SUS304 T0.10 ; Die-cutting side burr with 0.05mm Max, no sharp corners ; No defect such as dent /scratch / oil / spot / nigrities etc. ; Hazardous substances must comply with ECT environmental control standards ; high temperature resistance 260°C±5°C / 3min ; Salt mist test can meet within 24 hours
See details